PAINT KIT INSTRUCTIONS

Welcome to your HAUS OF DRIP Paintable Bear Kit! You’re about to create your own one-of-a-kind masterpiece🐻

‎ ‎

‎

NOTE: FOR SPLATTER PAINT SETS, SCROLL DOWN FOR INSTRUCTIONS
01

SET UP

→ Cover your workspace with the plastic sheet provided.

→ Put on your gloves & apron.

→ Place your bear on the plastic plate.

02

MIX

→ Pour paint into the cup, alternating colors for a layered look.

→ Do not stir! this keeps the marble drip effect.

03

DRIP

→ Hold your bear steady (you can tilt slightly).

→ Slowly pour paint over the top, letting it drip naturally.

→ Use the spoon or brush to guide paint into blank areas if needed.

04

DRY

→ Once you’re happy with your design, leave your bear to dry for 24 hours.

→ Keep it in a safe, flat spot where it won’t be touched.

🎨 Every bear is unique — no two will ever come out the same. Have fun, experiment, and let your creativity drip!

Tag your creations @Hausofdripbears

  • TIP💡 Save a little paint

    Don’t empty your bottles all at once — keep a bit aside for touch-ups or to layer extra drips later. This helps enhance the marble effect and gives you more control over the final look.

  • TIP 💡 Don’t rush the drip

    Tilt your bear slowly and let gravity do the work — this creates smoother, natural-looking swirls.

  • TIP 💡 Use the brush for detail

    If you want more control, dip the brush into the cup and guide paint exactly where you want it.

1 3
FAQs

SPLATTER PAINT KIT INSTRUCTIONS

Welcome to your HAUS OF DRIP Paintable Bear Kit! You’re about to create your own one-of-a-kind masterpiece🐻
01

SET UP

→ Lay out the protective plastic sheet provided to cover your workspace.
→ Put on your gloves & apron to keep clean.
→ Place your bear on the plastic plate.

02

BASE COAT

→ Use the black paint to completely cover your bear.
→ Make sure the entire surface is coated evenly (use your hands with gloves or spoon for faster coverage).

03

SPLATTER COLORS

→ Pour each neon paint color onto a plate or tray.
→ Dip your paintbrush into one color at a time and flick or tap it over your bear to create splatters.
→ Layer different colors and rotate the bear as you go for full coverage.

04

DRY

→ Once you’re happy with your design, leave your bear to dry for 24 hours.
→ Keep it in a safe, flat spot where it won’t be touched.

  • TIP💡 Save a little paint

    Don’t empty your bottles all at once — keep a bit aside for touch-ups or to layer extra drips later. This helps enhance the marble effect and gives you more control over the final look.

  • TIP 💡 Don’t rush the drip

    Tilt your bear slowly and let gravity do the work — this creates smoother, natural-looking swirls.

  • TIP 💡 Use the brush for detail

    If you want more control, dip the brush into the cup and guide paint exactly where you want it.

1 3
FAQs